npm i -g homebridge-samsungtv-control@latest. Ensure all your Samsung TVs are turned on for discovery, then restart Homebridge. The plugin supports Samsung TV models from 2017 onwards running the Tizen Operating System and parses model numbers from 2018 through 2020 to extract specific information.For installation and configuration, refer to the detailed documentation, which includes step-by-step instructions with images. If you encounter any issues, check the common issues page first. Before opening a new issue, carefully read the guidelines to provide all necessary details for effective assistance. Here we will provide the solution of Samsung TV Homebridge Not Working.
Common issues Of Samsung Tv Homebridge
There are following issues due to which samsung tv homebridge is not working:
TV is turning ON but no other command works
Turning on the TV works via the Wake on LAN protocol, which is universally compatible, but other commands rely on the Samsung API and may fail if your TV isn’t compatible. If your TV is compatible, ensure you didn’t select Deny when the pairing popup appeared. To verify, go to Settings > General > External Device Manager > Device Connection Manager > Device List and confirm Deny wasn’t selected.
The pairing popup it’s not shown on the TV
The issue with your Samsung TV not working with the Homebridge plugin might be due to incompatibility or a previously denied pairing request. First, verify if your TV model is compatible and ensure it responds to the API endpoint (http://TV_IP:8001/api/v2/). Check the Device Connection Manager settings to confirm you didn’t deny pairing access. If denied, revoke the plugin’s access via Samsung Smart Hub or TV settings, reconfigure the plugin with the correct IP, and provide debug logs if the problem persists.
TV is always asking for permissions
Steps to Resolve Samsung TV Homebridge Plugin Permission Issues:
- File Access Permissions: Ensure the Homebridge server has the necessary permissions to write the authorization token to the designated file location.
- Token Storage: Verify that the Homebridge plugin can access and save the token in the correct directory.
- Run in Debug Mode: Start the Homebridge server in debug mode to monitor console logs and check for details about the token and any file access errors.
- Check TV Settings: On your Samsung TV, go to Settings > General > External Device Manager > Device Connection Manager and disable Access Notification.
- Restart Homebridge: Restart the Homebridge server to ensure all changes take effect.
- Verify Logs: Review debug logs for any errors or warnings related to token storage or file permissions.
- Consult Documentation: Refer to the Homebridge Samsung Tizen documentation for detailed troubleshooting steps.
- Community Support: If the issue persists, seek help from the Homebridge Community for further assistance.
I have added the main bridge and the TVs don’t appear
Apple requires heavy accessories like TVs to have their own bridge to prevent issues from affecting other devices. Each Samsung TV added via Homebridge needs a separate bridge in the Home app to appear properly. Ensure your phone, SmartThings app, and TV firmware are updated, Bluetooth is enabled, and your phone is within range of the TV. If problems persist, restart your devices, check HDMI connections, set the correct source, and perform a cold boot on your TV.
Devices are running on random ports
The plugin does not control which port each TV will use, and Homebridge typically won’t reassign ports when restarting the server. However, if port conflicts occur, Homebridge allows you to define a range of ports for external accessories, including TVs. You can set this range in the configuration file under the "ports" section by specifying a "start" and "end" value.
Homebridge shows a speaker option but not exposed to Home app
When an accessory is created, a speaker option is added, visible in the Homebridge UI but not in the Home app. This feature enables volume control via the Apple TV Remote, accessible through the Control Center. The issue typically stems from plugin misconfiguration, incomplete compatibility with HomeKit, or a missing bridge setup. Troubleshooting steps include verifying plugin settings, ensuring proper HomeKit connection, restarting Homebridge, re-adding the device to HomeKit, and updating the Home app.
Conclusion
FAQS
- Why is casting to Samsung TV not working?
Casting may fail if your TV and casting device aren’t on the same Wi-Fi network or if the casting feature is disabled on the TV. Restart both devices and ensure screen sharing or casting is enabled in your TV settings.
- Can Samsung TV work with HomeKit?
Samsung TVs don’t natively support HomeKit, but you can use the Homebridge Samsung Tizen plugin to connect your TV to Apple HomeKit for basic controls.
- Why is my smart hub not working on my Samsung TV?
The Smart Hub might not work due to network issues, outdated firmware, or a temporary glitch. Restart your TV, check your internet connection, and update the TV software if needed.
- Why is my app not working on my Samsung TV?
Apps may stop working due to outdated software, poor internet connection, or temporary glitches. Restart your TV, reinstall the app, and ensure your TV firmware is up to date.